Daikin FTKN12JEVJU Manuale di Installazione

R410A Split SeriesINSTALLATION MANUALDAIKIN ROOM AIR CONDITIONEREnglishFrançaisEspañolInstallation manualManuel d’installationManual de instalaciónMOD

English 9English5-5. Prepare the accessory (separate product) [Figure 2].1) Remove the cover from the accessory (separate product).2) Insert the conn

10 EnglishIndoor Unit Installation6.Drain piping1) Connect the drain hose, as described right.2) Remove the air filters and pour some water into the

English 11English2.Refrigerant pipingCAUTION• Use the flare nut fixed to the main unit. (To prevent cracking of the flare nut by aged deterioration.)

12 EnglishTrial Operation and Testing1.Trial operation and testing1-1 Measure the supply voltage and make sure that it falls in the specified range.1

(1010) HT3P253189-1EM09B108CTwo-dimensional bar code is a code for manufacturing.6616275700_CV_3P253189-1E.fm Page 2 Friday, August 20, 2010 9:33 A

English 1EnglishSafety Precautions• Read these Safety Precautions carefully to ensure correct installation.• This manual classifies the precautions i

2 EnglishSafety PrecautionsAccessories – , Choosing an Installation Site• Before choosing the installation site, obtain user approval.1.Indoor un

English 3EnglishPreparation before Installation1.Removing and installing front panel•Removal methodHook fingers on the tabs on the left and right of

4 EnglishIndoor Unit Installation Drawings3/16” × 5/8” (M4 × 16mm)Service lidOpening service lidService lid is opening/closing type.Opening method1)

English 5EnglishIndoor Unit Installation1.Installing the mounting plate• The mounting plate should be installed on a wall which can support the weigh

6 EnglishIndoor Unit Installation2.Boring a wall hole and installing wall embedded pipe• For walls containing metal frame or metal board, be sure to

English 7English3-2. Left-side, left-back, or left-bottom piping 1) Attach the drain hose to the underside of the refrigerant pipes with adhesive vin

8 EnglishIndoor Unit Installation4.Wiring1) As shown in the illustration, insert the wires including the ground wire into the conduit and secure them